Gutter Rolling Machine

Hangzhou IUWON Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of gutter rolling machine in China. With abundant experience, we warmly welcome you to buy high quality gutter rolling machine from our factory. Good service and reasonable price are available.

Profile Forming for Different Gutter Designs

Gutters can vary in width, depth, side-wall angle, edge shape, and reinforcement structure. The roller stations are therefore designed according to the actual cross-section instead of using one fixed tooling arrangement for every gutter.

During forming, the coil passes through several roller pairs. Each station performs a controlled bending operation, gradually transforming the flat strip into the final gutter profile. This approach helps maintain dimensional stability while reducing deformation marks on the finished surface.

The machine can be configured for common rain gutters, box gutters, half-round gutters, and customized gutter sections according to the required profile drawing.

Main Technical Parameters

Continuous Production from Coil to Finished Gutter

The production process starts with the coil being loaded onto the decoiler. The material is released at a controlled speed and guided into the feeding section. After leveling, the strip enters the forming stations, where each roller pair creates a specific part of the gutter geometry.

Once the required cross-section has been formed, the cutting unit separates the continuous gutter into predetermined lengths. The PLC system coordinates feeding, forming, length measurement, and cutting, allowing operators to adjust production parameters from the control panel.

For gutters requiring holes, joints, or other processing features, a punching unit can be added according to the location and dimensions of the openings.

Production Line Configuration

Applications & Customized Gutter Production

Finished gutters are used to collect and guide rainwater from roof surfaces toward downpipes or drainage systems. They are commonly installed on houses, warehouses, factories, agricultural buildings, workshops, commercial properties, and other structures with pitched or low-slope roofs.

Different building projects may require different gutter widths and profiles. The machine can therefore be manufactured around the customer's required section dimensions, material thickness, and finished length.

For machine configuration, the following information is normally required:

Gutter profile drawing or sample

Gutter width and depth

Material type

Material thickness

Coil width

Required finished length

Hole or slot requirements

Target forming speed

Required automation level

Local electrical specification

A properly matched roller design allows the machine to produce long, continuous gutter sections with stable dimensions, reducing manual bending, cutting, and profile adjustment during production.