R Panel Roll Former

The R Panel Roll Former is a specialized roll forming machine designed for continuous production of R-panel and PBR-panel roofing and siding sheets. These panels are among the most widely used metal roofing profiles in commercial, industrial, and steel-framed buildings across North America and global markets.
R-panels feature a high-strength-to-weight ratio, a 36-inch (914mm) coverage width per panel, and a major rib pattern that provides excellent structural rigidity. The PBR variant includes an extended purlin-bearing leg for superior load-bearing capacity at panel overlaps. This machine handles color-coated steel (PPGI/PPGL), galvanized steel (GI/GL), aluminum, and alu-zinc steel coils, producing consistent, high-precision panels ready for installation.
Built with a 350–450 H-beam mainframe, 45# forged steel rollers with chromium plating, and a Delta PLC control system, the R Panel Roll Former delivers reliable performance at production speeds up to 30 m/min. The hydraulic post-cutting system with Cr12 quenched blade ensures clean, burr-free cuts at ±2mm length tolerance.

Send Inquiry

Hangzhou IUWON Technology Co., Ltd. is one of the most reliable manufacturers and suppliers of r panel roll former in China. With abundant experience, we warmly welcome you to buy high quality r panel roll former from our factory. Good service and reasonable price are available.

R Panel Roll Former Key Features & Advantages

High-Speed Production
Adjustable forming speed from 10 to 30 m/min, maximizing output for high-volume roofing panel production lines.

Precision Roll Forming
15–20 roller stations with 45# forged steel rollers (chromium-plated) ensure consistent panel geometry within ±1.0mm processing precision.

Delta PLC Control System
Siemens/Delta PLC with touch screen enables automatic length setting, batch counting, and cutting control - operated by just one person.

Hydraulic Post-Cutting
Cr12 quenched blade (HRC 58–60) with hydraulic drive delivers clean, burr-free cuts. Length tolerance: ±2mm.

Versatile Material Handling
Processes PPGI, PPGL, GI, GL, and alu-zinc steel coils (0.3–0.8mm thick, 760–1250mm wide) for diverse project requirements.

Heavy-Duty Mainframe
300–450 H-beam structure with 75–90mm diameter 45# steel main shafts ensures long-term stability under continuous production load.

R‑Panel & PBR‑Panel Roll Forming Machine Technical Specifications

Raw Material Specifications

Parameter	Specification
Suitable Material	PPGI, PPGL, GI, GL, Alu‑zinc steel coil, Aluminum sheet
Material Thickness	0.3 – 0.8 mm
Raw Material Width	760 – 1250 mm (1038 / 1055 / 1092 mm typical)
Yield Strength	230 – 300 / 350 / 550 – 675 MPa (optional)

Roll Forming System

Parameter	Specification
Number of Roller Stations	15 – 20 steps (customizable)
Roller Material	45# Forged Steel with Chromium Plating
Roller Diameter	Φ70 – Φ90 mm
Main Shaft Material	45# Steel, finish turned
Main Shaft Diameter	Φ75 – Φ90 mm
Machine Main Frame	300 – 450 H‑beam steel
Side Panel Thickness	16 mm
Chain Wheel & Chain	1 inch

Cutting System

Parameter	Specification
Cutting Mode	Hydraulic post‑cutting (after roll forming)
Cutting Blade Material	Cr12, Quenched treatment (HRC 58 – 60)
Length Tolerance	± 2 mm
Processing Precision	Within 1.0 mm

Power & Drive

Parameter	Specification
Main Motor Power	3.0 – 5.5 kW
Hydraulic Pump Station	4.0 kW
Hydraulic Pressure	18 – 20 MPa
Drive Mode	Motor drive via chain and gear
Power Supply	220V / 380V / 415V / 460V, 50/60Hz, 3‑Phase (customizable)

Control System

Parameter	Specification
Control System	Delta / Mitsubishi / Siemens PLC (optional)
Touch Screen	Delta HMI touch screen
Frequency System	Delta inverter
Operator Needed	1 person

Production Performance

Parameter	Specification
Forming Speed	10 – 15 m/min (standard); up to 30 m/min (high‑speed)
Panel Coverage Width	36" (914mm) per panel
Panel Profile	R‑panel, PBR‑panel (purlin‑bearing leg)

Decoiler Specifications

Parameter	Specification
Decoiler Capacity	5T / 8T / 10T / 15T (optional)
Decoiler Type	Manual / Hydraulic motor / Passive (optional)

Machine Dimensions & Weight

Parameter	Specification
Overall Dimensions (L×W×H)	7200 – 9800 × 1800 – 2000 × 1750 – 1800 mm
Equipment Weight	Approx. 4.8 – 8.0 Tons
Container Loading	1 × 40' HQ container

Warranty & Service

Parameter	Specification
Warranty	24 months (whole machine)
After‑Sales Service	Lifetime technical support; free parts replacement during warranty
Installation & Training	On‑site installation available; user manual & video provided
Delivery Time	25 – 35 days after deposit

Request a Quote

Get a customized solution for your R‑panel production needs. Competitive pricing, global shipping, and 24‑month warranty. Contact us today for pricing and technical consultation.

Hot Tags: r panel roll former, China r panel roll former manufacturers, suppliers, factory, iron roof sheet making machine, metal roll forming companies, metal roll forming systems, R Panel Machine, roller former, sheet metal construction panel forming line